Microham microkeyer ii setup with ic-7800

#Microham microkeyer ii setup with ic 7800 how to#
#Microham microkeyer ii setup with ic 7800 64 bits#
#Microham microkeyer ii setup with ic 7800 software#
#Microham microkeyer ii setup with ic 7800 series#

Now, the thing that I never understood, but it seems to do the trick: Your settings worked, almost, but not completely. Thanks for putting me on the right track, Jordi. Please send me a whatsapp message to my phone +34 656409020 to arrange a remote session.

If you still have problems I'm offering to perform a remote session via Teamviewer to review all your setup, but I have configured many times the IC-7300 to many users succesfully.

According to my own experience I have had many problems using 19200. I suggest to create the splt with 9600 bauds (not 19200). If you create a split with VSPE it should work also but may interfere because the IC-7300 uses PTT via CAT. Port: (the one created by the USB driver, in your case COM8)Д«aud rate: 19200 (must match with the same Baud Rate setting defined in your radio menu) In OmniRig you have to select this as Rig1: In your radio it's important you have the following settings into the CI-V section:Д¬I-V USB->REMOTE Transceive Address = 00H It's important that if you run Swisslog as administrator, so also have to run WSJT-X and OmniRig as administrator as well. I know many Swisslog users here having the same radio and using OmniRig, WSJT and Swisslog. You should not have any problems using OmniRig with your IC-7300. So, does anyone have a setup instructionВ for dummies (like me), that actually works, to get communication between IC7300, Swisslog and WSJT-x simultaneously?

I tried, at a friends station, to use the server provided with his Microham MicrokeyerВ II, and that worked flawlessly, but as I have no microkeyer myself, that doesn't help me. (I tried to split COM8, creating a new COM, in my case COM1), and then WSJT-X connected to COM1, but Swisslog refused, and vice versa). I have also tried com0com, but same there, no success.ДЄnd yesterday I tried Eterlogic VSPE,, but no success there either. There is something in the setup (possibly in OmniRig) that I fail to understand. Jordi has suggested I use Omnirig, but I cannot make both SL and WSJT-X talk to the radio simultaneously.

#Microham microkeyer ii setup with ic 7800 64 bits#

My computer is a Windows 7 laptop, 64 bits operating system. The Icom USB codec in my case has assigned COM8.

#Microham microkeyer ii setup with ic 7800 how to#

I have struggled for more than one year now with how to set up WSJT-X and Swisslog so that both programmes can access my Icom IC7300. I plan toВ provide additional articles here as those projects proceed.Hello everybody.

#Microham microkeyer ii setup with ic 7800 software#

I am also experimenting with the addition of a software defined radio to the setup. We are considering the addition of legal limit solid state amplifiers and high-power bandpass filters to our station and these will be integrated into the microHAM system when installed. For more on this, check out the article on the contest on this Blog. I had the opportunity to use our new microHAM System as part of the 2014 CQ WPX SSB Contest this weekend and it definitely helped be to improve my score.

Station Automation Follow-On Project вЂ“ Software Defined Radio Integration.

Station Automation Part 2 вЂ“ Second Operating Position And Antenna Switching.

Station Automation Part 1 вЂ“ microHAM SO2R And System Design.

#Microham microkeyer ii setup with ic 7800 series#

You may want to look at the other articles in this series for more information as well: There is also a good Yahoo! group for the microHAM system. The documentation for the microHAM system is very good and Jozef ( OM7ZZ) and Joe ( W4TV) at microHAM were very good about answering my questions and steering me in the right direction as I built and configured my system. While theВ construction and configuration work described here may seem a little complex, itвЂ™s really not that difficult if you create a good plan for your system at the outset (see the first post in this series). The use of independent rotator control programs is made possible by the microHAM RouterВ which implements two separate Virtual COM Ports for the rotator(s) associated with each SMDвЂ™s selected antenna(s) for itsВ associated radio.ДЄs you can probably tell from the articles in this series, the microHAM system is very powerful and can handle most any stationвЂ™s setup including those which are much more complicatedВ than ours. We can click on any location on HRDвЂ™s RotatorвЂ™sВ map and the softwareВ will turn the currently selected antennas in that direction. The other rotator controller is HRD Rotator (lower right) which displays a map of the world and a path. In the upper left is DXLabвЂ™s DXView program which will steer our antennas in the direction associated withВ the callsign which is currently entered into the logger. The picture above shows our rotator control software.

Microham microkeyer ii setup with ic-7800